#!/bin/ksh -p
#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#

#
# Copyright (c) 1999, 2010, Oracle and/or its affiliates. All rights reserved.
# Copyright 2008, 2010, Richard Lowe
# Copyright 2011 Nexenta Systems, Inc.  All rights reserved.
# Copyright 2012 Joshua M. Clulow <josh@sysmgr.org>
#
# Based on the nightly script from the integration folks,
# Mostly modified and owned by mike_s.
# Changes also by kjc, dmk.
#
# BRINGOVER_WS may be specified in the env file.
# The default is the old behavior of CLONE_WS
#
# -i on the command line, means fast options, so when it's on the
# command line (only), lint and check builds are skipped no matter what
# the setting of their individual flags are in NIGHTLY_OPTIONS.
#
# LINTDIRS can be set in the env file, format is a list of:
#
#	/dirname-to-run-lint-on flag
#
#	Where flag is:	y - enable lint noise diff output
#			n - disable lint noise diff output
#
#	For example: LINTDIRS="$SRC/uts n $SRC/stand y $SRC/psm y"
#
# OPTHOME  may be set in the environment to override /opt
#

#
# The CDPATH variable causes ksh's `cd' builtin to emit messages to stdout
# under certain circumstances, which can really screw things up; unset it.
#
unset CDPATH

# Get the absolute path of the nightly script that the user invoked.  This
# may be a relative path, and we need to do this before changing directory.
nightly_path=`whence $0`

#
# Keep track of where we found nightly so we can invoke the matching
# which_scm script.  If that doesn't work, don't go guessing, just rely
# on the $PATH settings, which will generally give us either /opt/onbld
# or the user's workspace.
#
WHICH_SCM=$(dirname $nightly_path)/which_scm
if [[ ! -x $WHICH_SCM ]]; then
	WHICH_SCM=which_scm
fi

function fatal_error
{
	print -u2 "nightly: $*"
	exit 1
}

#
# Function to do a DEBUG and non-DEBUG build. Needed because we might
# need to do another for the source build, and since we only deliver DEBUG or
# non-DEBUG packages.
#
# usage: normal_build
#
function normal_build {

	typeset orig_p_FLAG="$p_FLAG"
	typeset crypto_signer="$CODESIGN_USER"

	suffix=""

	# non-DEBUG build begins

	if [ "$F_FLAG" = "n" ]; then
		set_non_debug_build_flags
		CODESIGN_USER="$crypto_signer" \
		    build "non-DEBUG" "$suffix-nd" "-nd" "$MULTI_PROTO"
	else
		echo "\n==== No non-DEBUG $open_only build ====\n" >> "$LOGFILE"
	fi

	# non-DEBUG build ends

	# DEBUG build begins

	if [ "$D_FLAG" = "y" ]; then
		set_debug_build_flags
		CODESIGN_USER="$crypto_signer" \
		    build "DEBUG" "$suffix" "" "$MULTI_PROTO"
	else
		echo "\n==== No DEBUG $open_only build ====\n" >> "$LOGFILE"
	fi

	# DEBUG build ends

	p_FLAG="$orig_p_FLAG"
}

#
# usage: run_hook HOOKNAME ARGS...
#
# If variable "$HOOKNAME" is defined, insert a section header into 
# our logs and then run the command with ARGS
#
function run_hook {
	HOOKNAME=$1
    	eval HOOKCMD=\$$HOOKNAME
	shift

	if [ -n "$HOOKCMD" ]; then 
	    	(
			echo "\n==== Running $HOOKNAME command: $HOOKCMD ====\n"
		    	( $HOOKCMD "$@" 2>&1 )
			if [ "$?" -ne 0 ]; then
			    	# Let exit status propagate up
			    	touch $TMPDIR/abort
			fi
		) | tee -a $mail_msg_file >> $LOGFILE

		if [ -f $TMPDIR/abort ]; then
			build_ok=n
			echo "\nAborting at request of $HOOKNAME" |
				tee -a $mail_msg_file >> $LOGFILE
			exit 1
		fi
	fi
}

# Return library search directive as function of given root.
function myldlibs {
	echo "-L$1/lib -L$1/usr/lib"
}

# Return header search directive as function of given root.
function myheaders {
	echo "-I$1/usr/include"
}

#
# Function to do the build, including package generation.
# usage: build LABEL SUFFIX ND MULTIPROTO
# - LABEL is used to tag build output.
# - SUFFIX is used to distinguish files (e.g., DEBUG vs non-DEBUG,
#   open-only vs full tree).
# - ND is "-nd" (non-DEBUG builds) or "" (DEBUG builds).
# - If MULTIPROTO is "yes", it means to name the proto area according to
#   SUFFIX.  Otherwise ("no"), (re)use the standard proto area.
#
function build {
	LABEL=$1
	SUFFIX=$2
	ND=$3
	MULTIPROTO=$4
	INSTALLOG=install${SUFFIX}-${MACH}
	NOISE=noise${SUFFIX}-${MACH}
	PKGARCHIVE=${PKGARCHIVE_ORIG}${SUFFIX}

	ORIGROOT=$ROOT
	[ $MULTIPROTO = no ] || export ROOT=$ROOT$SUFFIX

	export ENVLDLIBS1=`myldlibs $ROOT`
	export ENVCPPFLAGS1=`myheaders $ROOT`

	this_build_ok=y
	#
	#	Build OS-Networking source
	#
	echo "\n==== Building OS-Net source at `date` ($LABEL) ====\n" \
		>> $LOGFILE

	rm -f $SRC/${INSTALLOG}.out
	cd $SRC
	/bin/time $MAKE -e install 2>&1 | \
	    tee -a $SRC/${INSTALLOG}.out >> $LOGFILE

	echo "\n==== Build errors ($LABEL) ====\n" >> $mail_msg_file
	egrep ":" $SRC/${INSTALLOG}.out |
		egrep -e "(^${MAKE}:|[ 	]error[: 	\n])" | \
		egrep -v "Ignoring unknown host" | \
		egrep -v "cc .* -o error " | \
		egrep -v "warning" | tee $TMPDIR/build_errs${SUFFIX} \
		>> $mail_msg_file
	if [[ -s $TMPDIR/build_errs${SUFFIX} ]]; then
		build_ok=n
		this_build_ok=n
	fi
	grep "bootblock image is .* bytes too big" $SRC/${INSTALLOG}.out \
		>> $mail_msg_file
	if [ "$?" = "0" ]; then
		build_ok=n
		this_build_ok=n
	fi

	echo "\n==== Build warnings ($LABEL) ====\n" >>$mail_msg_file
	egrep -i warning: $SRC/${INSTALLOG}.out \
		| egrep -v '^tic:' \
		| egrep -v "symbol (\`|')timezone' has differing types:" \
		| egrep -v "parameter <PSTAMP> set to" \
		| egrep -v "Ignoring unknown host" \
		| egrep -v "redefining segment flags attribute for" \
		| tee $TMPDIR/build_warnings${SUFFIX} >> $mail_msg_file
	if [[ -s $TMPDIR/build_warnings${SUFFIX} ]]; then
		build_ok=n
		this_build_ok=n
	fi

	echo "\n==== Ended OS-Net source build at `date` ($LABEL) ====\n" \
		>> $LOGFILE

	echo "\n==== Elapsed build time ($LABEL) ====\n" >>$mail_msg_file
	tail -3  $SRC/${INSTALLOG}.out >>$mail_msg_file

	if [ "$i_FLAG" = "n" ]; then
		rm -f $SRC/${NOISE}.ref
		if [ -f $SRC/${NOISE}.out ]; then
			mv $SRC/${NOISE}.out $SRC/${NOISE}.ref
		fi
		grep : $SRC/${INSTALLOG}.out \
			| egrep -v '^/' \
			| egrep -v '^(Start|Finish|real|user|sys|./bld_awk)' \
			| egrep -v '^tic:' \
			| egrep -v '^mcs' \
			| egrep -v '^LD_LIBRARY_PATH=' \
			| egrep -v 'ar: creating' \
			| egrep -v 'ar: writing' \
			| egrep -v 'conflicts:' \
			| egrep -v ':saved created' \
			| egrep -v '^stty.*c:' \
			| egrep -v '^mfgname.c:' \
			| egrep -v '^uname-i.c:' \
			| egrep -v '^volumes.c:' \
			| egrep -v '^lint library construction:' \
			| egrep -v 'tsort: INFORM:' \
			| egrep -v 'stripalign:' \
			| egrep -v 'chars, width' \
			| egrep -v "symbol (\`|')timezone' has differing types:" \
			| egrep -v 'PSTAMP' \
			| egrep -v '|%WHOANDWHERE%|' \
			| egrep -v '^Manifying' \
			| egrep -v 'Ignoring unknown host' \
			| egrep -v 'Processing method:' \
			| egrep -v '^Writing' \
			| egrep -v 'spellin1:' \
			| egrep -v '^adding:' \
			| egrep -v "^echo 'msgid" \
			| egrep -v '^echo ' \
			| egrep -v '\.c:$' \
			| egrep -v '^Adding file:' \
			| egrep -v 'CLASSPATH=' \
			| egrep -v '\/var\/mail\/:saved' \
			| egrep -v -- '-DUTS_VERSION=' \
			| egrep -v '^Running Mkbootstrap' \
			| egrep -v '^Applet length read:' \
			| egrep -v 'bytes written:' \
			| egrep -v '^File:SolarisAuthApplet.bin' \
			| egrep -v -i 'jibversion' \
			| egrep -v '^Output size:' \
			| egrep -v '^Solo size statistics:' \
			| egrep -v '^Using ROM API Version' \
			| egrep -v '^Zero Signature length:' \
			| egrep -v '^Note \(probably harmless\):' \
			| egrep -v '::' \
			| egrep -v -- '-xcache' \
			| egrep -v '^\+' \
			| egrep -v '^cc1: note: -fwritable-strings' \
			| egrep -v 'svccfg-native -s svc:/' \
			| sort | uniq >$SRC/${NOISE}.out
		if [ ! -f $SRC/${NOISE}.ref ]; then
			cp $SRC/${NOISE}.out $SRC/${NOISE}.ref
		fi
		echo "\n==== Build noise differences ($LABEL) ====\n" \
			>>$mail_msg_file
		diff $SRC/${NOISE}.ref $SRC/${NOISE}.out >>$mail_msg_file
	fi

	#
	#	Re-sign selected binaries using signing server
	#	(gatekeeper builds only)
	#
	if [ -n "$CODESIGN_USER" -a "$this_build_ok" = "y" ]; then
		echo "\n==== Signing proto area at `date` ====\n" >> $LOGFILE
		signing_file="${TMPDIR}/signing"
		rm -f ${signing_file}
		export CODESIGN_USER
		signproto $SRC/tools/codesign/creds 2>&1 | \
			tee -a ${signing_file} >> $LOGFILE
		echo "\n==== Finished signing proto area at `date` ====\n" \
		    >> $LOGFILE
		echo "\n==== Crypto module signing errors ($LABEL) ====\n" \
		    >> $mail_msg_file
		egrep 'WARNING|ERROR' ${signing_file} >> $mail_msg_file
		if (( $? == 0 )) ; then
			build_ok=n
			this_build_ok=n
		fi
	fi

	#
	#	Building Packages
	#
	if [ "$p_FLAG" = "y" -a "$this_build_ok" = "y" ]; then
		if [ -d $SRC/pkg ]; then
			echo "\n==== Creating $LABEL packages at `date` ====\n" \
				>> $LOGFILE
			echo "Clearing out $PKGARCHIVE ..." >> $LOGFILE
			rm -rf $PKGARCHIVE >> "$LOGFILE" 2>&1
			mkdir -p $PKGARCHIVE >> "$LOGFILE" 2>&1

			rm -f $SRC/pkg/${INSTALLOG}.out
			cd $SRC/pkg
			/bin/time $MAKE -e install 2>&1 | \
			    tee -a $SRC/pkg/${INSTALLOG}.out >> $LOGFILE

			echo "\n==== package build errors ($LABEL) ====\n" \
				>> $mail_msg_file

			egrep "${MAKE}|ERROR|WARNING" $SRC/pkg/${INSTALLOG}.out | \
				grep ':' | \
				grep -v PSTAMP | \
				egrep -v "Ignoring unknown host" | \
				tee $TMPDIR/package >> $mail_msg_file
			if [[ -s $TMPDIR/package ]]; then
				build_extras_ok=n
				this_build_ok=n
			fi
		else
			#
			# Handle it gracefully if -p was set but there so
			# no pkg directory.
			#
			echo "\n==== No $LABEL packages to build ====\n" \
				>> $LOGFILE
		fi
	else
		echo "\n==== Not creating $LABEL packages ====\n" >> $LOGFILE
	fi

	ROOT=$ORIGROOT
}

# Usage: dolint /dir y|n
# Arg. 2 is a flag to turn on/off the lint diff output
function dolint {
	if [ ! -d "$1" ]; then
		echo "dolint error: $1 is not a directory"
		exit 1
	fi

	if [ "$2" != "y" -a "$2" != "n" ]; then
		echo "dolint internal error: $2 should be 'y' or 'n'"
		exit 1
	fi

	lintdir=$1
	dodiff=$2
	base=`basename $lintdir`
	LINTOUT=$lintdir/lint-${MACH}.out
	LINTNOISE=$lintdir/lint-noise-${MACH}
	export ENVLDLIBS1=`myldlibs $ROOT`
	export ENVCPPFLAGS1=`myheaders $ROOT`

	set_debug_build_flags

	#
	#	'$MAKE lint' in $lintdir
	#
	echo "\n==== Begin '$MAKE lint' of $base at `date` ====\n" >> $LOGFILE

	# remove old lint.out
	rm -f $lintdir/lint.out $lintdir/lint-noise.out
	if [ -f $lintdir/lint-noise.ref ]; then
		mv $lintdir/lint-noise.ref ${LINTNOISE}.ref
	fi

	rm -f $LINTOUT
	cd $lintdir
	#
	# Remove all .ln files to ensure a full reference file
	#
	rm -f Nothing_to_remove \
	    `find . \( -name SCCS -o -name .hg -o -name .svn -o -name .git \) \
	    	-prune -o -type f -name '*.ln' -print `

	/bin/time $MAKE -ek lint 2>&1 | \
	    tee -a $LINTOUT >> $LOGFILE

	echo "\n==== '$MAKE lint' of $base ERRORS ====\n" >> $mail_msg_file

	grep "$MAKE:" $LINTOUT |
		egrep -v "Ignoring unknown host" | \
		tee $TMPDIR/lint_errs >> $mail_msg_file
	if [[ -s $TMPDIR/lint_errs ]]; then
		build_extras_ok=n
	fi

	echo "\n==== Ended '$MAKE lint' of $base at `date` ====\n" >> $LOGFILE

	echo "\n==== Elapsed time of '$MAKE lint' of $base ====\n" \
		>>$mail_msg_file
	tail -3  $LINTOUT >>$mail_msg_file

	rm -f ${LINTNOISE}.ref
	if [ -f ${LINTNOISE}.out ]; then
		mv ${LINTNOISE}.out ${LINTNOISE}.ref
	fi
        grep : $LINTOUT | \
		egrep -v '^(real|user|sys)' |
		egrep -v '(library construction)' | \
		egrep -v ': global crosschecks' | \
		egrep -v 'Ignoring unknown host' | \
		egrep -v '\.c:$' | \
		sort | uniq > ${LINTNOISE}.out
	if [ ! -f ${LINTNOISE}.ref ]; then
		cp ${LINTNOISE}.out ${LINTNOISE}.ref
	fi

	if [ "$dodiff" != "n" ]; then
		echo "\n==== lint warnings $base ====\n" \
			>>$mail_msg_file
		# should be none, though there are a few that were filtered out
		# above
		egrep -i '(warning|lint):' ${LINTNOISE}.out \
			| sort | uniq | tee $TMPDIR/lint_warns >> $mail_msg_file
		if [[ -s $TMPDIR/lint_warns ]]; then
			build_extras_ok=n
		fi
		echo "\n==== lint noise differences $base ====\n" \
			>> $mail_msg_file
		diff ${LINTNOISE}.ref ${LINTNOISE}.out \
			>> $mail_msg_file
	fi
}

#
# Build and install the onbld tools.
#
# usage: build_tools DESTROOT
#
# returns non-zero status if the build was successful.
#
function build_tools {
	DESTROOT=$1

	INSTALLOG=install-${MACH}

	echo "\n==== Building tools at `date` ====\n" \
		>> $LOGFILE

	rm -f ${TOOLS}/${INSTALLOG}.out
	cd ${TOOLS}
	/bin/time $MAKE TOOLS_PROTO=${DESTROOT} -e install 2>&1 | \
	    tee -a ${TOOLS}/${INSTALLOG}.out >> $LOGFILE

	echo "\n==== Tools build errors ====\n" >> $mail_msg_file

	egrep ":" ${TOOLS}/${INSTALLOG}.out |
		egrep -e "(${MAKE}:|[ 	]error[: 	\n])" | \
		egrep -v "Ignoring unknown host" | \
		egrep -v warning | tee $TMPDIR/tools_errors >> $mail_msg_file

	if [[ -s $TMPDIR/tools_errors ]]; then
		return 1
	fi
	return 0
}

#
# Set up to use locally installed tools.
#
# usage: use_tools TOOLSROOT
#
function use_tools {
	TOOLSROOT=$1

	#
	# If we're not building ON workspace, then the TOOLSROOT
	# settings here are clearly ignored by the workspace
	# makefiles, prepending nonexistent directories to PATH is
	# harmless, and we clearly do not wish to override
	# ONBLD_TOOLS.
	#
	# If we're building an ON workspace, then the prepended PATH
	# elements should supercede the preexisting ONBLD_TOOLS paths,
	# and we want to override ONBLD_TOOLS to catch the tools that
	# don't have specific path env vars here.
	#
	# So the only conditional behavior is overriding ONBLD_TOOLS,
	# and we check for "an ON workspace" by looking for
	# ${TOOLSROOT}/opt/onbld.
	#

	STABS=${TOOLSROOT}/opt/onbld/bin/${MACH}/stabs
	export STABS
	CTFSTABS=${TOOLSROOT}/opt/onbld/bin/${MACH}/ctfstabs
	export CTFSTABS
	GENOFFSETS=${TOOLSROOT}/opt/onbld/bin/genoffsets
	export GENOFFSETS

	CTFCONVERT=${TOOLSROOT}/opt/onbld/bin/${MACH}/ctfconvert
	export CTFCONVERT
	CTFMERGE=${TOOLSROOT}/opt/onbld/bin/${MACH}/ctfmerge
	export CTFMERGE

	PATH="${TOOLSROOT}/opt/onbld/bin/${MACH}:${PATH}"
	PATH="${TOOLSROOT}/opt/onbld/bin:${PATH}"
	export PATH

	if [ -d "${TOOLSROOT}/opt/onbld" ]; then
		ONBLD_TOOLS=${TOOLSROOT}/opt/onbld
		export ONBLD_TOOLS
	fi

	echo "\n==== New environment settings. ====\n" >> $LOGFILE
	echo "STABS=${STABS}" >> $LOGFILE
	echo "CTFSTABS=${CTFSTABS}" >> $LOGFILE
	echo "CTFCONVERT=${CTFCONVERT}" >> $LOGFILE
	echo "CTFMERGE=${CTFMERGE}" >> $LOGFILE
	echo "PATH=${PATH}" >> $LOGFILE
	echo "ONBLD_TOOLS=${ONBLD_TOOLS}" >> $LOGFILE
}

function staffer {
	if [ $ISUSER -ne 0 ]; then
		"$@"
	else
		arg="\"$1\""
		shift
		for i
		do
			arg="$arg \"$i\""
		done
		eval su $STAFFER -c \'$arg\'
	fi
}

#
# Verify that the closed bins are present
#
function check_closed_bins {
	if [[ -n "$ON_CLOSED_BINS" && ! -d "$ON_CLOSED_BINS" ]]; then
		echo "ON_CLOSED_BINS must point to the closed binaries tree."
		build_ok=n
		exit 1
	fi
}

#
# wrapper over wsdiff.
# usage: do_wsdiff LABEL OLDPROTO NEWPROTO
#
function do_wsdiff {
	label=$1
	oldproto=$2
	newproto=$3

	wsdiff="wsdiff"
	[ "$t_FLAG" = y ] && wsdiff="wsdiff -t"

	echo "\n==== Getting object changes since last build at `date`" \
	    "($label) ====\n" | tee -a $LOGFILE >> $mail_msg_file
	$wsdiff -s -r ${TMPDIR}/wsdiff.results $oldproto $newproto 2>&1 | \
		    tee -a $LOGFILE >> $mail_msg_file
	echo "\n==== Object changes determined at `date` ($label) ====\n" | \
	    tee -a $LOGFILE >> $mail_msg_file
}

#
# Functions for setting build flags (DEBUG/non-DEBUG).  Keep them
# together.
#

function set_non_debug_build_flags {
	export RELEASE_BUILD ; RELEASE_BUILD=
	unset EXTRA_OPTIONS
	unset EXTRA_CFLAGS
}

function set_debug_build_flags {
	unset RELEASE_BUILD
	unset EXTRA_OPTIONS
	unset EXTRA_CFLAGS
}


MACH=`uname -p`

if [ "$OPTHOME" = "" ]; then
	OPTHOME=/opt
	export OPTHOME
fi

USAGE='Usage: nightly [-in] [+t] [-V VERS ] <env_file>

Where:
	-i	Fast incremental options (no clobber, lint, check)
	-n      Do not do a bringover
	+t	Use the build tools in $ONBLD_TOOLS/bin
	-V VERS set the build version string to VERS

	<env_file>  file in Bourne shell syntax that sets and exports
	variables that configure the operation of this script and many of
	the scripts this one calls. If <env_file> does not exist,
	it will be looked for in $OPTHOME/onbld/env.

non-DEBUG is the default build type. Build options can be set in the
NIGHTLY_OPTIONS variable in the <env_file> as follows:

	-A	check for ABI differences in .so files
	-C	check for cstyle/hdrchk errors
	-D	do a build with DEBUG on
	-F	do _not_ do a non-DEBUG build
	-G	gate keeper default group of options (-au)
	-I	integration engineer default group of options (-ampu)
	-M	do not run pmodes (safe file permission checker)
	-N	do not run protocmp
	-R	default group of options for building a release (-mp)
	-U	update proto area in the parent
	-V VERS set the build version string to VERS
	-f	find unreferenced files
	-i	do an incremental build (no "make clobber")
	-l	do "make lint" in $LINTDIRS (default: $SRC y)
	-m	send mail to $MAILTO at end of build
	-n      do not do a bringover
	-p	create packages
	-r	check ELF runtime attributes in the proto area
	-t	build and use the tools in $SRC/tools (default setting)
	+t	Use the build tools in $ONBLD_TOOLS/bin
	-u	update proto_list_$MACH and friends in the parent workspace;
		when used with -f, also build an unrefmaster.out in the parent
	-w	report on differences between previous and current proto areas
'
#
#	A log file will be generated under the name $LOGFILE
#	for partially completed build and log.`date '+%F'`
#	in the same directory for fully completed builds.
#

# default values for low-level FLAGS; G I R are group FLAGS
A_FLAG=n
C_FLAG=n
D_FLAG=n
F_FLAG=n
f_FLAG=n
i_FLAG=n; i_CMD_LINE_FLAG=n
l_FLAG=n
M_FLAG=n
m_FLAG=n
N_FLAG=n
n_FLAG=n
p_FLAG=n
r_FLAG=n
t_FLAG=y
U_FLAG=n
u_FLAG=n
V_FLAG=n
w_FLAG=n
W_FLAG=n
#
build_ok=y
build_extras_ok=y

#
# examine arguments
#

OPTIND=1
while getopts +intV:W FLAG
do
	case $FLAG in
	  i )	i_FLAG=y; i_CMD_LINE_FLAG=y
		;;
	  n )	n_FLAG=y
		;;
	 +t )	t_FLAG=n
		;;
	  V )	V_FLAG=y
		V_ARG="$OPTARG"
		;;
	  W )   W_FLAG=y
		;;
	 \? )	echo "$USAGE"
		exit 1
		;;
	esac
done

# correct argument count after options
shift `expr $OPTIND - 1`

# test that the path to the environment-setting file was given
if [ $# -ne 1 ]; then
	echo "$USAGE"
	exit 1
fi

# check if user is running nightly as root
# ISUSER is set non-zero if an ordinary user runs nightly, or is zero
# when root invokes nightly.
/usr/bin/id | grep '^uid=0(' >/dev/null 2>&1
ISUSER=$?;	export ISUSER

#
# force locale to C
LANG=C;		export LANG
LC_ALL=C;	export LC_ALL
LC_COLLATE=C;	export LC_COLLATE
LC_CTYPE=C;	export LC_CTYPE
LC_MESSAGES=C;	export LC_MESSAGES
LC_MONETARY=C;	export LC_MONETARY
LC_NUMERIC=C;	export LC_NUMERIC
LC_TIME=C;	export LC_TIME

# clear environment variables we know to be bad for the build
unset LD_OPTIONS
unset LD_AUDIT		LD_AUDIT_32		LD_AUDIT_64
unset LD_BIND_NOW	LD_BIND_NOW_32		LD_BIND_NOW_64
unset LD_BREADTH	LD_BREADTH_32		LD_BREADTH_64
unset LD_CONFIG		LD_CONFIG_32		LD_CONFIG_64
unset LD_DEBUG		LD_DEBUG_32		LD_DEBUG_64
unset LD_DEMANGLE	LD_DEMANGLE_32		LD_DEMANGLE_64
unset LD_FLAGS		LD_FLAGS_32		LD_FLAGS_64
unset LD_LIBRARY_PATH	LD_LIBRARY_PATH_32	LD_LIBRARY_PATH_64
unset LD_LOADFLTR	LD_LOADFLTR_32		LD_LOADFLTR_64
unset LD_NOAUDIT	LD_NOAUDIT_32		LD_NOAUDIT_64
unset LD_NOAUXFLTR	LD_NOAUXFLTR_32		LD_NOAUXFLTR_64
unset LD_NOCONFIG	LD_NOCONFIG_32		LD_NOCONFIG_64
unset LD_NODIRCONFIG	LD_NODIRCONFIG_32	LD_NODIRCONFIG_64
unset LD_NODIRECT	LD_NODIRECT_32		LD_NODIRECT_64
unset LD_NOLAZYLOAD	LD_NOLAZYLOAD_32	LD_NOLAZYLOAD_64
unset LD_NOOBJALTER	LD_NOOBJALTER_32	LD_NOOBJALTER_64
unset LD_NOVERSION	LD_NOVERSION_32		LD_NOVERSION_64
unset LD_ORIGIN		LD_ORIGIN_32		LD_ORIGIN_64
unset LD_PRELOAD	LD_PRELOAD_32		LD_PRELOAD_64
unset LD_PROFILE	LD_PROFILE_32		LD_PROFILE_64

unset CONFIG
unset GROUP
unset OWNER
unset REMOTE
unset ENV
unset ARCH
unset CLASSPATH
unset NAME

#
# To get ONBLD_TOOLS from the environment, it must come from the env file.
# If it comes interactively, it is generally TOOLS_PROTO, which will be
# clobbered before the compiler version checks, which will therefore fail.
#
unset ONBLD_TOOLS

#
#	Setup environmental variables
#
if [ -f /etc/nightly.conf ]; then
	. /etc/nightly.conf
fi    

if [ -f $1 ]; then
	if [[ $1 = */* ]]; then
		. $1
	else
		. ./$1
	fi
else
	if [ -f $OPTHOME/onbld/env/$1 ]; then
		. $OPTHOME/onbld/env/$1
	else
		echo "Cannot find env file as either $1 or $OPTHOME/onbld/env/$1"
		exit 1
	fi
fi

# contents of stdenv.sh inserted after next line:
# STDENV_START
# STDENV_END

# Check if we have sufficient data to continue...
[[ -v CODEMGR_WS ]] || fatal_error "Error: Variable CODEMGR_WS not set."
if  [[ "${NIGHTLY_OPTIONS}" == ~(F)n ]] ; then
	# Check if the gate data are valid if we don't do a "bringover" below
	[[ -d "${CODEMGR_WS}" ]] || \
		fatal_error "Error: ${CODEMGR_WS} is not a directory."
	[[ -f "${CODEMGR_WS}/usr/src/Makefile" ]] || \
		fatal_error "Error: ${CODEMGR_WS}/usr/src/Makefile not found."
fi

#
# place ourselves in a new task, respecting BUILD_PROJECT if set.
#
if [ -z "$BUILD_PROJECT" ]; then
	/usr/bin/newtask -c $$
else
	/usr/bin/newtask -c $$ -p $BUILD_PROJECT
fi

ps -o taskid= -p $$ | read build_taskid
ps -o project= -p $$ | read build_project

#
# See if NIGHTLY_OPTIONS is set
#
if [ "$NIGHTLY_OPTIONS" = "" ]; then
	NIGHTLY_OPTIONS="-aBm"
fi

#
# If BRINGOVER_WS was not specified, let it default to CLONE_WS
#
if [ "$BRINGOVER_WS" = "" ]; then
	BRINGOVER_WS=$CLONE_WS
fi

#
# If BRINGOVER_FILES was not specified, default to usr
#
if [ "$BRINGOVER_FILES" = "" ]; then
	BRINGOVER_FILES="usr"
fi

check_closed_bins

#
# Note: changes to the option letters here should also be applied to the
#	bldenv script.  `d' is listed for backward compatibility.
#
NIGHTLY_OPTIONS=-${NIGHTLY_OPTIONS#-}
OPTIND=1
while getopts +ABCDdFfGIilMmNnpRrtUuwW FLAG $NIGHTLY_OPTIONS
do
	case $FLAG in
	  A )	A_FLAG=y
		;;
	  B )	D_FLAG=y
		;; # old version of D
	  C )	C_FLAG=y
		;;
	  D )	D_FLAG=y
		;;
	  F )	F_FLAG=y
		;;
	  f )	f_FLAG=y
		;;
	  G )   u_FLAG=y
		;;
	  I )	m_FLAG=y
		p_FLAG=y
		u_FLAG=y
		;;
	  i )	i_FLAG=y
		;;
	  l )	l_FLAG=y
		;;
	  M )	M_FLAG=y
		;;
	  m )	m_FLAG=y
		;;
	  N )	N_FLAG=y
		;;
	  n )	n_FLAG=y
		;;
	  p )	p_FLAG=y
		;;
	  R )	m_FLAG=y
		p_FLAG=y
		;;
	  r )	r_FLAG=y
		;;
	 +t )	t_FLAG=n
		;;
	  U )   if [ -z "${PARENT_ROOT}" ]; then
			echo "PARENT_ROOT must be set if the U flag is" \
			    "present in NIGHTLY_OPTIONS."
			exit 1
		fi
		NIGHTLY_PARENT_ROOT=$PARENT_ROOT
		if [ -n "${PARENT_TOOLS_ROOT}" ]; then
			NIGHTLY_PARENT_TOOLS_ROOT=$PARENT_TOOLS_ROOT
		fi
		U_FLAG=y
		;;
	  u )	u_FLAG=y
		;;
	  w )	w_FLAG=y
		;;
	  W )   W_FLAG=y
		;;
	 \? )	echo "$USAGE"
		exit 1
		;;
	esac
done

if [ $ISUSER -ne 0 ]; then
	# Set default value for STAFFER, if needed.
	if [ -z "$STAFFER" -o "$STAFFER" = "nobody" ]; then
		STAFFER=`/usr/xpg4/bin/id -un`
		export STAFFER
	fi
fi

if [ -z "$MAILTO" -o "$MAILTO" = "nobody" ]; then
	MAILTO=$STAFFER
	export MAILTO
fi

PATH="$OPTHOME/onbld/bin:$OPTHOME/onbld/bin/${MACH}:/usr/ccs/bin"
PATH="$PATH:$OPTHOME/SUNWspro/bin:/usr/bin:/usr/sbin:/usr/ucb"
PATH="$PATH:/usr/openwin/bin:/usr/sfw/bin:/opt/sfw/bin:."
export PATH

# roots of source trees, both relative to $SRC and absolute.
relsrcdirs="."
abssrcdirs="$SRC"

PROTOCMPTERSE="protocmp.terse -gu"
POUND_SIGN="#"
# have we set RELEASE_DATE in our env file?
if [ -z "$RELEASE_DATE" ]; then
	RELEASE_DATE=$(LC_ALL=C date +"%B %Y")
fi
BUILD_DATE=$(LC_ALL=C date +%Y-%b-%d)
BASEWSDIR=$(basename $CODEMGR_WS)
DEV_CM="\"@(#)SunOS Internal Development: $LOGNAME $BUILD_DATE [$BASEWSDIR]\""

# we export POUND_SIGN, RELEASE_DATE and DEV_CM to speed up the build process
# by avoiding repeated shell invocations to evaluate Makefile.master
# definitions.
export POUND_SIGN RELEASE_DATE DEV_CM

maketype="distributed"
if [[ -z "$MAKE" ]]; then
	MAKE=dmake
elif [[ ! -x "$MAKE" ]]; then
	echo "\$MAKE is set to garbage in the environment"
	exit 1	
fi
export PATH
export MAKE

if [ "${SUNWSPRO}" != "" ]; then
	PATH="${SUNWSPRO}/bin:$PATH"
	export PATH
fi

hostname=$(uname -n)
if [[ $DMAKE_MAX_JOBS != +([0-9]) || $DMAKE_MAX_JOBS -eq 0 ]]
then
	maxjobs=
	if [[ -f $HOME/.make.machines ]]
	then
		# Note: there is a hard tab and space character in the []s
		# below.
		egrep -i "^[ 	]*$hostname[ 	\.]" \
			$HOME/.make.machines | read host jobs
		maxjobs=${jobs##*=}
	fi

	if [[ $maxjobs != +([0-9]) || $maxjobs -eq 0 ]]
	then
		# default
		maxjobs=4
	fi

	export DMAKE_MAX_JOBS=$maxjobs
fi

DMAKE_MODE=parallel;
export DMAKE_MODE

if [ -z "${ROOT}" ]; then
	echo "ROOT must be set."
	exit 1
fi

#
# if -V flag was given, reset VERSION to V_ARG
#
if [ "$V_FLAG" = "y" ]; then
	VERSION=$V_ARG
fi

TMPDIR="/tmp/nightly.tmpdir.$$"
export TMPDIR
rm -rf ${TMPDIR}
mkdir -p $TMPDIR || exit 1
chmod 777 $TMPDIR

#
# Tools should only be built non-DEBUG.  Keep track of the tools proto
# area path relative to $TOOLS, because the latter changes in an
# export build.
#
# TOOLS_PROTO is included below for builds other than usr/src/tools
# that look for this location.  For usr/src/tools, this will be
# overridden on the $MAKE command line in build_tools().
#
TOOLS=${SRC}/tools
TOOLS_PROTO_REL=proto/root_${MACH}-nd
TOOLS_PROTO=${TOOLS}/${TOOLS_PROTO_REL};	export TOOLS_PROTO

unset   CFLAGS LD_LIBRARY_PATH LDFLAGS

# create directories that are automatically removed if the nightly script
# fails to start correctly
function newdir {
	dir=$1
	toadd=
	while [ ! -d $dir ]; do
		toadd="$dir $toadd"
		dir=`dirname $dir`
	done
	torm=
	newlist=
	for dir in $toadd; do
		if staffer mkdir $dir; then
			newlist="$ISUSER $dir $newlist"
			torm="$dir $torm"
		else
			[ -z "$torm" ] || staffer rmdir $torm
			return 1
		fi
	done
	newdirlist="$newlist $newdirlist"
	return 0
}
newdirlist=

[ -d $CODEMGR_WS ] || newdir $CODEMGR_WS || exit 1

# since this script assumes the build is from full source, it nullifies
# variables likely to have been set by a "ws" script; nullification
# confines the search space for headers and libraries to the proto area
# built from this immediate source.
ENVLDLIBS1=
ENVLDLIBS2=
ENVLDLIBS3=
ENVCPPFLAGS1=
ENVCPPFLAGS2=
ENVCPPFLAGS3=
ENVCPPFLAGS4=
PARENT_ROOT=

export ENVLDLIBS3 ENVCPPFLAGS1 ENVCPPFLAGS2 ENVCPPFLAGS3 ENVCPPFLAGS4 \
	ENVLDLIBS1 ENVLDLIBS2 PARENT_ROOT

PKGARCHIVE_ORIG=$PKGARCHIVE

#
# Juggle the logs and optionally send mail on completion.
#

function logshuffle {
    	LLOG="$ATLOG/log.`date '+%F.%H:%M'`"
	if [ -f $LLOG -o -d $LLOG ]; then
	    	LLOG=$LLOG.$$
	fi
	mkdir $LLOG
	export LLOG

	if [ "$build_ok" = "y" ]; then
		mv $ATLOG/proto_list_${MACH} $LLOG

		if [ -f $ATLOG/proto_list_tools_${MACH} ]; then
			mv $ATLOG/proto_list_tools_${MACH} $LLOG
	        fi

		if [ -f $TMPDIR/wsdiff.results ]; then
		    	mv $TMPDIR/wsdiff.results $LLOG
		fi

		if [ -f $TMPDIR/wsdiff-nd.results ]; then
			mv $TMPDIR/wsdiff-nd.results $LLOG
		fi
	fi

	#
	# Now that we're about to send mail, it's time to check the noise
	# file.  In the event that an error occurs beyond this point, it will
	# be recorded in the nightly.log file, but nowhere else.  This would
	# include only errors that cause the copying of the noise log to fail
	# or the mail itself not to be sent.
	#

	exec >>$LOGFILE 2>&1
	if [ -s $build_noise_file ]; then
	    	echo "\n==== Nightly build noise ====\n" |
		    tee -a $LOGFILE >>$mail_msg_file
		cat $build_noise_file >>$LOGFILE
		cat $build_noise_file >>$mail_msg_file
		echo | tee -a $LOGFILE >>$mail_msg_file
	fi
	rm -f $build_noise_file

	case "$build_ok" in
		y)
			state=Completed
			;;
		i)
			state=Interrupted
			;;
		*)
	    		state=Failed
			;;
	esac

	if [[ $state != "Interrupted" && $build_extras_ok != "y" ]]; then
		state=Failed
	fi

	NIGHTLY_STATUS=$state
	export NIGHTLY_STATUS

	run_hook POST_NIGHTLY $state
	run_hook SYS_POST_NIGHTLY $state

	#
	# mailx(1) sets From: based on the -r flag
	# if it is given.
	#
	mailx_r=
	if [[ -n "${MAILFROM}" ]]; then
		mailx_r="-r ${MAILFROM}"
	fi

	cat $build_time_file $build_environ_file $mail_msg_file \
	    > ${LLOG}/mail_msg
	if [ "$m_FLAG" = "y" ]; then
	    	cat ${LLOG}/mail_msg | /usr/bin/mailx ${mailx_r} -s \
	"Nightly ${MACH} Build of `basename ${CODEMGR_WS}` ${state}." \
			${MAILTO}
	fi

	if [ "$u_FLAG" = "y" -a "$build_ok" = "y" ]; then
	    	staffer cp ${LLOG}/mail_msg $PARENT_WS/usr/src/mail_msg-${MACH}
		staffer cp $LOGFILE $PARENT_WS/usr/src/nightly-${MACH}.log
	fi

	mv $LOGFILE $LLOG
}

#
#	Remove the locks and temporary files on any exit
#
function cleanup {
    	logshuffle

	[ -z "$lockfile" ] || staffer rm -f $lockfile
	[ -z "$atloglockfile" ] || rm -f $atloglockfile
	[ -z "$ulockfile" ] || staffer rm -f $ulockfile
	[ -z "$Ulockfile" ] || rm -f $Ulockfile

	set -- $newdirlist
	while [ $# -gt 0 ]; do
		ISUSER=$1 staffer rmdir $2
		shift; shift
	done
	rm -rf $TMPDIR
}

function cleanup_signal {
    	build_ok=i
	# this will trigger cleanup(), above.
	exit 1
}

trap cleanup 0
trap cleanup_signal 1 2 3 15

#
# Generic lock file processing -- make sure that the lock file doesn't
# exist.  If it does, it should name the build host and PID.  If it
# doesn't, then make sure we can create it.  Clean up locks that are
# known to be stale (assumes host name is unique among build systems
# for the workspace).
#
function create_lock {
	lockf=$1
	lockvar=$2

	ldir=`dirname $lockf`
	[ -d $ldir ] || newdir $ldir || exit 1
	eval $lockvar=$lockf

	while ! staffer ln -s $hostname.$STAFFER.$$ $lockf 2> /dev/null; do
		basews=`basename $CODEMGR_WS`
		ls -l $lockf | nawk '{print $NF}' | IFS=. read host user pid
		if [ "$host" != "$hostname" ]; then
			echo "$MACH build of $basews apparently" \
			    "already started by $user on $host as $pid."
			exit 1
		elif kill -s 0 $pid 2>/dev/null; then
			echo "$MACH build of $basews already started" \
			    "by $user as $pid."
			exit 1
		else
			# stale lock; clear it out and try again
			rm -f $lockf
		fi
	done
}

#
# Return the list of interesting proto areas, depending on the current
# options.
#
function allprotos {
	typeset roots="$ROOT"

	if [[ "$F_FLAG" = n && "$MULTI_PROTO" = yes ]]; then
		roots="$roots $ROOT-nd"
	fi

	echo $roots
}

# Ensure no other instance of this script is running on this host.
# LOCKNAME can be set in <env_file>, and is by default, but is not
# required due to the use of $ATLOG below.
if [ -n "$LOCKNAME" ]; then
	create_lock /tmp/$LOCKNAME "lockfile"
fi
#
# Create from one, two, or three other locks:
#	$ATLOG/nightly.lock
#		- protects against multiple builds in same workspace
#	$PARENT_WS/usr/src/nightly.$MACH.lock
#		- protects against multiple 'u' copy-backs
#	$NIGHTLY_PARENT_ROOT/nightly.lock
#		- protects against multiple 'U' copy-backs
#
# Overriding ISUSER to 1 causes the lock to be created as root if the
# script is run as root.  The default is to create it as $STAFFER.
ISUSER=1 create_lock $ATLOG/nightly.lock "atloglockfile"
if [ "$u_FLAG" = "y" ]; then
	create_lock $PARENT_WS/usr/src/nightly.$MACH.lock "ulockfile"
fi
if [ "$U_FLAG" = "y" ]; then
	# NIGHTLY_PARENT_ROOT is written as root if script invoked as root.
	ISUSER=1 create_lock $NIGHTLY_PARENT_ROOT/nightly.lock "Ulockfile"
fi

# Locks have been taken, so we're doing a build and we're committed to
# the directories we may have created so far.
newdirlist=

#
# Create mail_msg_file
#
mail_msg_file="${TMPDIR}/mail_msg"
touch $mail_msg_file
build_time_file="${TMPDIR}/build_time"
build_environ_file="${TMPDIR}/build_environ"
touch $build_environ_file
#
#	Move old LOGFILE aside
#	ATLOG directory already made by 'create_lock' above
#
if [ -f $LOGFILE ]; then
	mv -f $LOGFILE ${LOGFILE}-
fi
#
#	Build OsNet source
#
START_DATE=`date`
SECONDS=0
echo "\n==== Nightly $maketype build started:   $START_DATE ====" \
    | tee -a $LOGFILE > $build_time_file

echo "\nBuild project:  $build_project\nBuild taskid:   $build_taskid" | \
    tee -a $mail_msg_file >> $LOGFILE

# make sure we log only to the nightly build file
build_noise_file="${TMPDIR}/build_noise"
exec </dev/null >$build_noise_file 2>&1

run_hook SYS_PRE_NIGHTLY
run_hook PRE_NIGHTLY

echo "\n==== list of environment variables ====\n" >> $LOGFILE
env >> $LOGFILE

echo "\n==== Nightly argument issues ====\n" | tee -a $mail_msg_file >> $LOGFILE

if [ "$N_FLAG" = "y" ]; then
	if [ "$p_FLAG" = "y" ]; then
		cat <<EOF | tee -a $mail_msg_file >> $LOGFILE
WARNING: the p option (create packages) is set, but so is the N option (do
         not run protocmp); this is dangerous; you should unset the N option
EOF
	else
		cat <<EOF | tee -a $mail_msg_file >> $LOGFILE
Warning: the N option (do not run protocmp) is set; it probably shouldn't be
EOF
	fi
	echo "" | tee -a $mail_msg_file >> $LOGFILE
fi

if [ "$D_FLAG" = "n" -a "$l_FLAG" = "y" ]; then
	#
	# In the past we just complained but went ahead with the lint
	# pass, even though the proto area was built non-DEBUG.  It's
	# unlikely that non-DEBUG headers will make a difference, but
	# rather than assuming it's a safe combination, force the user
	# to specify a DEBUG build.
	#
	echo "WARNING: DEBUG build not requested; disabling lint.\n" \
	    | tee -a $mail_msg_file >> $LOGFILE
	l_FLAG=n
fi

if [ "$f_FLAG" = "y" ]; then
	if [ "$i_FLAG" = "y" ]; then
		echo "WARNING: the -f flag cannot be used during incremental" \
		    "builds; ignoring -f\n" | tee -a $mail_msg_file >> $LOGFILE
		f_FLAG=n
	fi
	if [ "${l_FLAG}${p_FLAG}" != "yy" ]; then
		echo "WARNING: the -f flag requires -l, and -p;" \
		    "ignoring -f\n" | tee -a $mail_msg_file >> $LOGFILE
		f_FLAG=n
	fi
fi

if [ "$w_FLAG" = "y" -a ! -d $ROOT ]; then
	echo "WARNING: -w specified, but $ROOT does not exist;" \
	    "ignoring -w\n" | tee -a $mail_msg_file >> $LOGFILE
	w_FLAG=n
fi

case $MULTI_PROTO in
yes|no)	;;
*)
	echo "WARNING: MULTI_PROTO is \"$MULTI_PROTO\"; " \
	    "should be \"yes\" or \"no\"." | tee -a $mail_msg_file >> $LOGFILE
	echo "Setting MULTI_PROTO to \"no\".\n" | \
	    tee -a $mail_msg_file >> $LOGFILE
	export MULTI_PROTO=no
	;;
esac

echo "\n==== Build version ====\n" | tee -a $mail_msg_file >> $LOGFILE
echo $VERSION | tee -a $mail_msg_file >> $LOGFILE

# Save the current proto area if we're comparing against the last build
if [ "$w_FLAG" = "y" -a -d "$ROOT" ]; then
    if [ -d "$ROOT.prev" ]; then
	rm -rf $ROOT.prev
    fi
    mv $ROOT $ROOT.prev
fi

# Same for non-DEBUG proto area
if [ "$w_FLAG" = "y" -a "$MULTI_PROTO" = yes -a -d "$ROOT-nd" ]; then
	if [ -d "$ROOT-nd.prev" ]; then
		rm -rf $ROOT-nd.prev
	fi
	mv $ROOT-nd $ROOT-nd.prev
fi

#
# Echo the SCM type of the parent workspace, this can't just be which_scm
# as that does not know how to identify various network repositories.
#
function parent_wstype {
	typeset scm_type junk

	CODEMGR_WS="$BRINGOVER_WS" "$WHICH_SCM" 2>/dev/null \
	    | read scm_type junk
	if [[ -z "$scm_type" || "$scm_type" == unknown ]]; then
		# Probe BRINGOVER_WS to determine its type
		if [[ $BRINGOVER_WS == ssh://* ]]; then
			scm_type="mercurial"
		elif [[ $BRINGOVER_WS == http://* ]] && \
		    wget -q -O- --save-headers "$BRINGOVER_WS/?cmd=heads" | \
		    egrep -s "application/mercurial" 2> /dev/null; then
			scm_type="mercurial"
		else
			scm_type="none"
		fi
	fi    

	# fold both unsupported and unrecognized results into "none"
	case "$scm_type" in
	mercurial)
		;;
	*)	scm_type=none
		;;
	esac

	echo $scm_type
}

# Echo the SCM types of $CODEMGR_WS and $BRINGOVER_WS
function child_wstype {
	typeset scm_type junk

	# Probe CODEMGR_WS to determine its type
	if [[ -d $CODEMGR_WS ]]; then
		$WHICH_SCM | read scm_type junk || exit 1
	fi

	case "$scm_type" in
	none|git|mercurial)
		;;
	*)	scm_type=none
		;;
	esac

	echo $scm_type
}

SCM_TYPE=$(child_wstype)

#
#	Decide whether to clobber
#
if [ "$i_FLAG" = "n" -a -d "$SRC" ]; then
	echo "\n==== Make clobber at `date` ====\n" >> $LOGFILE

	cd $SRC
	# remove old clobber file
	rm -f $SRC/clobber.out
	rm -f $SRC/clobber-${MACH}.out

	# Remove all .make.state* files, just in case we are restarting
	# the build after having interrupted a previous 'make clobber'.
	find . \( -name SCCS -o -name .hg -o -name .svn -o -name .git \
		-o -name 'interfaces.*' \) -prune \
		-o -name '.make.*' -print | xargs rm -f

	$MAKE -ek clobber 2>&1 | tee -a $SRC/clobber-${MACH}.out >> $LOGFILE
	echo "\n==== Make clobber ERRORS ====\n" >> $mail_msg_file
	grep "$MAKE:" $SRC/clobber-${MACH}.out |
		egrep -v "Ignoring unknown host" | \
		tee $TMPDIR/clobber_errs >> $mail_msg_file

	if [[ -s $TMPDIR/clobber_errs ]]; then
		build_extras_ok=n
	fi

	if [[ "$t_FLAG" = "y" ]]; then
		echo "\n==== Make tools clobber at `date` ====\n" >> $LOGFILE
		cd ${TOOLS}
		rm -f ${TOOLS}/clobber-${MACH}.out
		$MAKE TOOLS_PROTO=$TOOLS_PROTO -ek clobber 2>&1 | \
			tee -a ${TOOLS}/clobber-${MACH}.out >> $LOGFILE
		echo "\n==== Make tools clobber ERRORS ====\n" \
			>> $mail_msg_file
		grep "$MAKE:" ${TOOLS}/clobber-${MACH}.out \
			>> $mail_msg_file
		if (( $? == 0 )); then
			build_extras_ok=n
		fi
		rm -rf ${TOOLS_PROTO}
		mkdir -p ${TOOLS_PROTO}
	fi

	typeset roots=$(allprotos)
	echo "\n\nClearing $roots" >> "$LOGFILE"
	rm -rf $roots

	# Get back to a clean workspace as much as possible to catch
	# problems that only occur on fresh workspaces.
	# Remove all .make.state* files, libraries, and .o's that may
	# have been omitted from clobber.  A couple of libraries are
	# under source code control, so leave them alone.
	# We should probably blow away temporary directories too.
	cd $SRC
	find $relsrcdirs \( -name SCCS -o -name .hg -o -name .svn \
	    -o -name .git -o -name 'interfaces.*' \) -prune -o \
	    \( -name '.make.*' -o -name 'lib*.a' -o -name 'lib*.so*' -o \
	       -name '*.o' \) -print | \
	    grep -v 'tools/ctf/dwarf/.*/libdwarf' | xargs rm -f
else
	echo "\n==== No clobber at `date` ====\n" >> $LOGFILE
fi

type bringover_mercurial > /dev/null 2>&1 || function bringover_mercurial {
	typeset -x PATH=$PATH

	# If the repository doesn't exist yet, then we want to populate it.
	if [[ ! -d $CODEMGR_WS/.hg ]]; then
		staffer hg init $CODEMGR_WS
		staffer echo "[paths]" > $CODEMGR_WS/.hg/hgrc
		staffer echo "default=$BRINGOVER_WS" >> $CODEMGR_WS/.hg/hgrc
		touch $TMPDIR/new_repository
	fi

	typeset -x HGMERGE="/bin/false"

	#
	# If the user has changes, regardless of whether those changes are
	# committed, and regardless of whether those changes conflict, then
	# we'll attempt to merge them either implicitly (uncommitted) or
	# explicitly (committed).
	#
	# These are the messages we'll use to help clarify mercurial output
	# in those cases.
	#
	typeset mergefailmsg="\
***\n\
*** nightly was unable to automatically merge your changes.  You should\n\
*** redo the full merge manually, following the steps outlined by mercurial\n\
*** above, then restart nightly.\n\
***\n"
	typeset mergepassmsg="\
***\n\
*** nightly successfully merged your changes.  This means that your working\n\
*** directory has been updated, but those changes are not yet committed.\n\
*** After nightly completes, you should validate the results of the merge,\n\
*** then use hg commit manually.\n\
***\n"

	#
	# For each repository in turn:
	#
	# 1. Do the pull.  If this fails, dump the output and bail out.
	#
	# 2. If the pull resulted in an extra head, do an explicit merge.
	#    If this fails, dump the output and bail out.
	#
	# Because we can't rely on Mercurial to exit with a failure code
	# when a merge fails (Mercurial issue #186), we must grep the
	# output of pull/merge to check for attempted and/or failed merges.
	#
	# 3. If a merge failed, set the message and fail the bringover.
	#
	# 4. Otherwise, if a merge succeeded, set the message
	#
	# 5. Dump the output, and any message from step 3 or 4.
	#

	typeset HG_SOURCE=$BRINGOVER_WS
	if [ ! -f $TMPDIR/new_repository ]; then
		HG_SOURCE=$TMPDIR/open_bundle.hg
		staffer hg --cwd $CODEMGR_WS incoming --bundle $HG_SOURCE \
		    -v $BRINGOVER_WS > $TMPDIR/incoming_open.out

		#
		# If there are no incoming changesets, then incoming will
		# fail, and there will be no bundle file.  Reset the source,
		# to allow the remaining logic to complete with no false
		# negatives.  (Unlike incoming, pull will return success
		# for the no-change case.)
		#
		if (( $? != 0 )); then
			HG_SOURCE=$BRINGOVER_WS
		fi
	fi

	staffer hg --cwd $CODEMGR_WS pull -u $HG_SOURCE \
	    > $TMPDIR/pull_open.out 2>&1
	if (( $? != 0 )); then
		printf "%s: pull failed as follows:\n\n" "$CODEMGR_WS"
		cat $TMPDIR/pull_open.out
		if grep "^merging.*failed" $TMPDIR/pull_open.out > /dev/null 2>&1; then
			printf "$mergefailmsg"
		fi
		touch $TMPDIR/bringover_failed
		return
	fi

	if grep "not updating" $TMPDIR/pull_open.out > /dev/null 2>&1; then
		staffer hg --cwd $CODEMGR_WS merge \
		    >> $TMPDIR/pull_open.out 2>&1
		if (( $? != 0 )); then
			printf "%s: merge failed as follows:\n\n" \
			    "$CODEMGR_WS"
			cat $TMPDIR/pull_open.out
			if grep "^merging.*failed" $TMPDIR/pull_open.out \
			    > /dev/null 2>&1; then
				printf "$mergefailmsg"
			fi
			touch $TMPDIR/bringover_failed
			return
		fi
	fi

	printf "updated %s with the following results:\n" "$CODEMGR_WS"
	cat $TMPDIR/pull_open.out
	if grep "^merging" $TMPDIR/pull_open.out >/dev/null 2>&1; then
		printf "$mergepassmsg"
	fi
	printf "\n"

	#
	# Per-changeset output is neither useful nor manageable for a
	# newly-created repository.
	#
	if [ -f $TMPDIR/new_repository ]; then
		return
	fi

	printf "\nadded the following changesets to open repository:\n"
	cat $TMPDIR/incoming_open.out
}

type bringover_none > /dev/null 2>&1 || function bringover_none {
	echo "Couldn't figure out what kind of SCM to use for $BRINGOVER_WS."
	touch $TMPDIR/bringover_failed
}

#
#	Decide whether to bringover to the codemgr workspace
#
if [ "$n_FLAG" = "n" ]; then
	PARENT_SCM_TYPE=$(parent_wstype)

	if [[ $SCM_TYPE != none && $SCM_TYPE != $PARENT_SCM_TYPE ]]; then
		echo "cannot bringover from $PARENT_SCM_TYPE to $SCM_TYPE, " \
		    "quitting at `date`." | tee -a $mail_msg_file >> $LOGFILE
		exit 1
	fi

	run_hook PRE_BRINGOVER

	echo "\n==== bringover to $CODEMGR_WS at `date` ====\n" >> $LOGFILE
	echo "\n==== BRINGOVER LOG ====\n" >> $mail_msg_file

	eval "bringover_${PARENT_SCM_TYPE}" 2>&1 |
		tee -a $mail_msg_file >> $LOGFILE

	if [ -f $TMPDIR/bringover_failed ]; then
		rm -f $TMPDIR/bringover_failed
		build_ok=n
		echo "trouble with bringover, quitting at `date`." |
			tee -a $mail_msg_file >> $LOGFILE
		exit 1
	fi

	#
	# It's possible that we used the bringover above to create
	# $CODEMGR_WS.  If so, then SCM_TYPE was previously "none,"
	# but should now be the same as $BRINGOVER_WS.
	#
	[[ $SCM_TYPE = none ]] && SCM_TYPE=$PARENT_SCM_TYPE

	run_hook POST_BRINGOVER

	check_closed_bins

else
	echo "\n==== No bringover to $CODEMGR_WS ====\n" >> $LOGFILE
fi

# Safeguards
[[ -v CODEMGR_WS ]] || fatal_error "Error: Variable CODEMGR_WS not set."
[[ -d "${CODEMGR_WS}" ]] || fatal_error "Error: ${CODEMGR_WS} is not a directory."
[[ -f "${CODEMGR_WS}/usr/src/Makefile" ]] || fatal_error "Error: ${CODEMGR_WS}/usr/src/Makefile not found."

echo "\n==== Build environment ====\n" | tee -a $build_environ_file >> $LOGFILE

# System
whence uname | tee -a $build_environ_file >> $LOGFILE
uname -a 2>&1 | tee -a $build_environ_file >> $LOGFILE
echo | tee -a $build_environ_file >> $LOGFILE

# make
whence $MAKE | tee -a $build_environ_file >> $LOGFILE
$MAKE -v | tee -a $build_environ_file >> $LOGFILE
echo "number of concurrent jobs = $DMAKE_MAX_JOBS" |
    tee -a $build_environ_file >> $LOGFILE

#
# Report the compiler versions.
#

if [[ ! -f $SRC/Makefile ]]; then
	build_ok=n
	echo "\nUnable to find \"Makefile\" in $SRC." | \
	    tee -a $build_environ_file >> $LOGFILE
	exit 1
fi

( cd $SRC
  for target in cc-version cc64-version java-version; do
	echo
	#
	# Put statefile somewhere we know we can write to rather than trip
	# over a read-only $srcroot.
	#
	rm -f $TMPDIR/make-state
	export SRC
	if $MAKE -K $TMPDIR/make-state -e $target 2>/dev/null; then
		continue
	fi
	touch $TMPDIR/nocompiler
  done
  echo
) | tee -a $build_environ_file >> $LOGFILE

if [ -f $TMPDIR/nocompiler ]; then
	rm -f $TMPDIR/nocompiler
	build_ok=n
	echo "Aborting due to missing compiler." |
		tee -a $build_environ_file >> $LOGFILE
	exit 1
fi

# as
whence as | tee -a $build_environ_file >> $LOGFILE
as -V 2>&1 | head -1 | tee -a $build_environ_file >> $LOGFILE
echo | tee -a $build_environ_file >> $LOGFILE

# Check that we're running a capable link-editor
whence ld | tee -a $build_environ_file >> $LOGFILE
LDVER=`ld -V 2>&1`
echo $LDVER | tee -a $build_environ_file >> $LOGFILE
LDVER=`echo $LDVER | sed -e "s/.*-1\.\([0-9]*\).*/\1/"`
if [ `expr $LDVER \< 422` -eq 1 ]; then
	echo "The link-editor needs to be at version 422 or higher to build" | \
	    tee -a $build_environ_file >> $LOGFILE
	echo "the latest stuff.  Hope your build works." | \
	    tee -a $build_environ_file >> $LOGFILE
fi

#
# Build and use the workspace's tools if requested
#
if [[ "$t_FLAG" = "y" ]]; then
	set_non_debug_build_flags

	build_tools ${TOOLS_PROTO}
	if (( $? != 0 )); then
		build_ok=n
	else
		use_tools $TOOLS_PROTO
	fi
fi

# timestamp the start of the normal build; the findunref tool uses it.
touch $SRC/.build.tstamp

normal_build

ORIG_SRC=$SRC
BINARCHIVE=${CODEMGR_WS}/bin-${MACH}.cpio.Z


#
# There are several checks that need to look at the proto area, but
# they only need to look at one, and they don't care whether it's
# DEBUG or non-DEBUG.
#
if [[ "$MULTI_PROTO" = yes && "$D_FLAG" = n ]]; then
	checkroot=$ROOT-nd
else
	checkroot=$ROOT
fi

if [ "$build_ok" = "y" ]; then
	echo "\n==== Creating protolist system file at `date` ====" \
		>> $LOGFILE
	protolist $checkroot > $ATLOG/proto_list_${MACH}
	echo "==== protolist system file created at `date` ====\n" \
		>> $LOGFILE

	if [ "$N_FLAG" != "y" ]; then

		E1=
		f1=
		for f in $f1; do
			if [ -f "$f" ]; then
				E1="$E1 -e $f"
			fi
		done

		E2=
		f2=
		if [ -d "$SRC/pkg" ]; then
			f2="$f2 exceptions/packaging"
		fi

		for f in $f2; do
			if [ -f "$f" ]; then
				E2="$E2 -e $f"
			fi
		done
	fi

	if [ "$N_FLAG" != "y" -a -d $SRC/pkg ]; then
		echo "\n==== Validating manifests against proto area ====\n" \
		    >> $mail_msg_file
		( cd $SRC/pkg ; $MAKE -e protocmp ROOT="$checkroot" ) | \
		    tee $TMPDIR/protocmp_noise >> $mail_msg_file
		if [[ -s $TMPDIR/protocmp_noise ]]; then
			build_extras_ok=n
		fi
	fi

	if [ "$N_FLAG" != "y" -a -f "$REF_PROTO_LIST" ]; then
		echo "\n==== Impact on proto area ====\n" >> $mail_msg_file
		if [ -n "$E2" ]; then
			ELIST=$E2
		else
			ELIST=$E1
		fi
		$PROTOCMPTERSE \
			"Files in yesterday's proto area, but not today's:" \
			"Files in today's proto area, but not yesterday's:" \
			"Files that changed between yesterday and today:" \
			${ELIST} \
			-d $REF_PROTO_LIST \
			$ATLOG/proto_list_${MACH} \
			>> $mail_msg_file
	fi
fi

if [[ "$u_FLAG" == "y" && "$build_ok" == "y" && \
    "$build_extras_ok" == "y" ]]; then
	staffer cp $ATLOG/proto_list_${MACH} \
		$PARENT_WS/usr/src/proto_list_${MACH}
fi

# Update parent proto area if necessary. This is done now
# so that the proto area has either DEBUG or non-DEBUG kernels.
# Note that this clears out the lock file, so we can dispense with
# the variable now.
if [ "$U_FLAG" = "y" -a "$build_ok" = "y" ]; then
	echo "\n==== Copying proto area to $NIGHTLY_PARENT_ROOT ====\n" | \
	    tee -a $LOGFILE >> $mail_msg_file
	rm -rf $NIGHTLY_PARENT_ROOT/*
	unset Ulockfile
	mkdir -p $NIGHTLY_PARENT_ROOT
	if [[ "$MULTI_PROTO" = no || "$D_FLAG" = y ]]; then
		( cd $ROOT; tar cf - . |
		    ( cd $NIGHTLY_PARENT_ROOT;  umask 0; tar xpf - ) ) 2>&1 |
		    tee -a $mail_msg_file >> $LOGFILE
	fi
	if [[ "$MULTI_PROTO" = yes && "$F_FLAG" = n ]]; then
		rm -rf $NIGHTLY_PARENT_ROOT-nd/*
		mkdir -p $NIGHTLY_PARENT_ROOT-nd
		cd $ROOT-nd
		( tar cf - . |
		    ( cd $NIGHTLY_PARENT_ROOT-nd; umask 0; tar xpf - ) ) 2>&1 |
		    tee -a $mail_msg_file >> $LOGFILE
	fi
	if [ -n "${NIGHTLY_PARENT_TOOLS_ROOT}" ]; then
		echo "\n==== Copying tools proto area to $NIGHTLY_PARENT_TOOLS_ROOT ====\n" | \
		    tee -a $LOGFILE >> $mail_msg_file
		rm -rf $NIGHTLY_PARENT_TOOLS_ROOT/*
		mkdir -p $NIGHTLY_PARENT_TOOLS_ROOT
		if [[ "$MULTI_PROTO" = no || "$D_FLAG" = y ]]; then
			( cd $TOOLS_PROTO; tar cf - . |
			    ( cd $NIGHTLY_PARENT_TOOLS_ROOT; 
			    umask 0; tar xpf - ) ) 2>&1 |
			    tee -a $mail_msg_file >> $LOGFILE
		fi
	fi
fi

#
# ELF verification: ABI (-A) and runtime (-r) checks
#
if [[ ($build_ok = y) && (($A_FLAG = y) || ($r_FLAG = y)) ]]; then
	# Directory ELF-data.$MACH holds the files produced by these tests.
	elf_ddir=$SRC/ELF-data.$MACH

	# If there is a previous ELF-data backup directory, remove it. Then,
	# rotate current ELF-data directory into its place and create a new
	# empty directory
	rm -rf $elf_ddir.ref
	if [[ -d $elf_ddir ]]; then
		mv $elf_ddir $elf_ddir.ref
	fi
	mkdir -p $elf_ddir

	# Call find_elf to produce a list of the ELF objects in the proto area.
	# This list is passed to check_rtime and interface_check, preventing
	# them from separately calling find_elf to do the same work twice.
	find_elf -fr $checkroot > $elf_ddir/object_list

	if [[ $A_FLAG = y ]]; then
	       	echo "\n==== Check versioning and ABI information ====\n"  | \
		    tee -a $LOGFILE >> $mail_msg_file

		# Produce interface description for the proto. Report errors.
		interface_check -o -w $elf_ddir -f object_list \
			-i interface -E interface.err
		if [[ -s $elf_ddir/interface.err ]]; then
			tee -a $LOGFILE < $elf_ddir/interface.err \
			    >> $mail_msg_file
			build_extras_ok=n
		fi

		# If ELF_DATA_BASELINE_DIR is defined, compare the new interface
		# description file to that from the baseline gate. Issue a
		# warning if the baseline is not present, and keep going.
		if [[ "$ELF_DATA_BASELINE_DIR" != '' ]]; then
			base_ifile="$ELF_DATA_BASELINE_DIR/interface"

		       	echo "\n==== Compare versioning and ABI information" \
			    "to baseline ====\n"  | \
			    tee -a $LOGFILE >> $mail_msg_file
		       	echo "Baseline:  $base_ifile\n" >> $LOGFILE

			if [[ -f $base_ifile ]]; then
				interface_cmp -d -o $base_ifile \
				    $elf_ddir/interface > $elf_ddir/interface.cmp
				if [[ -s $elf_ddir/interface.cmp ]]; then
					echo | tee -a $LOGFILE >> $mail_msg_file
					tee -a $LOGFILE < \
					    $elf_ddir/interface.cmp \
					    >> $mail_msg_file
					build_extras_ok=n
				fi
			else
			       	echo "baseline not available. comparison" \
                                    "skipped" | \
				    tee -a $LOGFILE >> $mail_msg_file
			fi

		fi
	fi

	if [[ $r_FLAG = y ]]; then
		echo "\n==== Check ELF runtime attributes ====\n" | \
		    tee -a $LOGFILE >> $mail_msg_file

		# If we're doing a DEBUG build the proto area will be left
		# with debuggable objects, thus don't assert -s.
		if [[ $D_FLAG = y ]]; then
			rtime_sflag=""
		else
			rtime_sflag="-s"
		fi
		check_rtime -i -m -v $rtime_sflag -o -w $elf_ddir \
			-D object_list  -f object_list -E runtime.err \
			-I runtime.attr.raw
		if (( $? != 0 )); then
			build_extras_ok=n
		fi

		# check_rtime -I output needs to be sorted in order to 
		# compare it to that from previous builds.
		sort $elf_ddir/runtime.attr.raw > $elf_ddir/runtime.attr
		rm $elf_ddir/runtime.attr.raw

		# Report errors
		if [[ -s $elf_ddir/runtime.err ]]; then
			tee -a $LOGFILE < $elf_ddir/runtime.err \
				>> $mail_msg_file
			build_extras_ok=n
		fi

		# If there is an ELF-data directory from a previous build,
		# then diff the attr files. These files contain information
		# about dependencies, versioning, and runpaths. There is some
		# overlap with the ABI checking done above, but this also
		# flushes out non-ABI interface differences along with the
		# other information.
		echo "\n==== Diff ELF runtime attributes" \
		    "(since last build) ====\n" | \
		    tee -a $LOGFILE >> $mail_msg_file >> $mail_msg_file

		if [[ -f $elf_ddir.ref/runtime.attr ]]; then
			diff $elf_ddir.ref/runtime.attr \
				$elf_ddir/runtime.attr \
				>> $mail_msg_file
		fi
	fi

	# If -u set, copy contents of ELF-data.$MACH to the parent workspace.
	if [[ "$u_FLAG" = "y" ]]; then
		p_elf_ddir=$PARENT_WS/usr/src/ELF-data.$MACH

		# If parent lacks the ELF-data.$MACH directory, create it
		if [[ ! -d $p_elf_ddir ]]; then
			staffer mkdir -p $p_elf_ddir
		fi

		# These files are used asynchronously by other builds for ABI
		# verification, as above for the -A option. As such, we require
		# the file replacement to be atomic. Copy the data to a temp
		# file in the same filesystem and then rename into place. 
		(
			cd $elf_ddir
			for elf_dfile in *; do
				staffer cp $elf_dfile \
				    ${p_elf_ddir}/${elf_dfile}.new
				staffer mv -f ${p_elf_ddir}/${elf_dfile}.new \
				    ${p_elf_ddir}/${elf_dfile}
			done
		)
	fi
fi

# DEBUG lint of kernel begins

if [ "$i_CMD_LINE_FLAG" = "n" -a "$l_FLAG" = "y" ]; then
	if [ "$LINTDIRS" = "" ]; then
		# LINTDIRS="$SRC/uts y $SRC/stand y $SRC/psm y"
		LINTDIRS="$SRC y"
	fi
	set $LINTDIRS
	while [ $# -gt 0 ]; do
		dolint $1 $2; shift; shift
	done
else
	echo "\n==== No '$MAKE lint' ====\n" >> $LOGFILE
fi

# "make check" begins

if [ "$i_CMD_LINE_FLAG" = "n" -a "$C_FLAG" = "y" ]; then
	# remove old check.out
	rm -f $SRC/check.out

	rm -f $SRC/check-${MACH}.out
	cd $SRC
	$MAKE -ek check ROOT="$checkroot" 2>&1 | tee -a $SRC/check-${MACH}.out \
	    >> $LOGFILE
	echo "\n==== cstyle/hdrchk errors ====\n" >> $mail_msg_file

	grep ":" $SRC/check-${MACH}.out |
		egrep -v "Ignoring unknown host" | \
		sort | uniq | tee $TMPDIR/check_errors >> $mail_msg_file

	if [[ -s $TMPDIR/check_errors ]]; then
		build_extras_ok=n
	fi
else
	echo "\n==== No '$MAKE check' ====\n" >> $LOGFILE
fi

echo "\n==== Find core files ====\n" | \
    tee -a $LOGFILE >> $mail_msg_file

find $abssrcdirs -name core -a -type f -exec file {} \; | \
	tee -a $LOGFILE >> $mail_msg_file

if [ "$f_FLAG" = "y" -a "$build_ok" = "y" ]; then
	echo "\n==== Diff unreferenced files (since last build) ====\n" \
	    | tee -a $LOGFILE >>$mail_msg_file
	rm -f $SRC/unref-${MACH}.ref
	if [ -f $SRC/unref-${MACH}.out ]; then
		mv $SRC/unref-${MACH}.out $SRC/unref-${MACH}.ref
	fi

	findunref -S $SCM_TYPE -t $SRC/.build.tstamp -s usr $CODEMGR_WS \
	    ${TOOLS}/findunref/exception_list 2>> $mail_msg_file | \
	    sort > $SRC/unref-${MACH}.out

	if [ ! -f $SRC/unref-${MACH}.ref ]; then
		cp $SRC/unref-${MACH}.out $SRC/unref-${MACH}.ref
	fi

	diff $SRC/unref-${MACH}.ref $SRC/unref-${MACH}.out >>$mail_msg_file
fi

# Verify that the usual lists of files, such as exception lists,
# contain only valid references to files.  If the build has failed,
# then don't check the proto area.
CHECK_PATHS=${CHECK_PATHS:-y}
if [ "$CHECK_PATHS" = y -a "$N_FLAG" != y ]; then
	echo "\n==== Check lists of files ====\n" | tee -a $LOGFILE \
		>>$mail_msg_file
	arg=-b
	[ "$build_ok" = y ] && arg=
	checkpaths $arg $checkroot > $SRC/check-paths.out 2>&1
	if [[ -s $SRC/check-paths.out ]]; then
		tee -a $LOGFILE < $SRC/check-paths.out >> $mail_msg_file
		build_extras_ok=n
	fi
fi

if [ "$M_FLAG" != "y" -a "$build_ok" = y ]; then
	echo "\n==== Impact on file permissions ====\n" \
		>> $mail_msg_file

	abspkg=
	for d in $abssrcdirs; do
		if [ -d "$d/pkg" ]; then
			abspkg="$abspkg $d"
		fi
	done

	if [ -n "$abspkg" ]; then
		for d in "$abspkg"; do
			( cd $d/pkg ; $MAKE -e pmodes ) >> $mail_msg_file
		done
	fi
fi

if [ "$w_FLAG" = "y" -a "$build_ok" = "y" ]; then
	if [[ "$MULTI_PROTO" = no || "$D_FLAG" = y ]]; then
		do_wsdiff DEBUG $ROOT.prev $ROOT
	fi

	if [[ "$MULTI_PROTO" = yes && "$F_FLAG" = n ]]; then
		do_wsdiff non-DEBUG $ROOT-nd.prev $ROOT-nd
	fi
fi

END_DATE=`date`
echo "==== Nightly $maketype build completed: $END_DATE ====" | \
    tee -a $LOGFILE >> $build_time_file

typeset -i10 hours
typeset -Z2 minutes
typeset -Z2 seconds

elapsed_time=$SECONDS
((hours = elapsed_time / 3600 ))
((minutes = elapsed_time / 60  % 60))
((seconds = elapsed_time % 60))

echo "\n==== Total build time ====" | \
    tee -a $LOGFILE >> $build_time_file
echo "\nreal    ${hours}:${minutes}:${seconds}" | \
    tee -a $LOGFILE >> $build_time_file

if [ "$u_FLAG" = "y" -a "$f_FLAG" = "y" -a "$build_ok" = "y" ]; then
	staffer cp ${SRC}/unref-${MACH}.out $PARENT_WS/usr/src/

	#
	# Produce a master list of unreferenced files -- ideally, we'd
	# generate the master just once after all of the nightlies
	# have finished, but there's no simple way to know when that
	# will be.  Instead, we assume that we're the last nightly to
	# finish and merge all of the unref-${MACH}.out files in
	# $PARENT_WS/usr/src/.  If we are in fact the final ${MACH} to
	# finish, then this file will be the authoritative master
	# list.  Otherwise, another ${MACH}'s nightly will eventually
	# overwrite ours with its own master, but in the meantime our
	# temporary "master" will be no worse than any older master
	# which was already on the parent.
	#

	set -- $PARENT_WS/usr/src/unref-*.out
	cp "$1" ${TMPDIR}/unref.merge
	shift

	for unreffile; do
		comm -12 ${TMPDIR}/unref.merge "$unreffile" > ${TMPDIR}/unref.$$
		mv ${TMPDIR}/unref.$$ ${TMPDIR}/unref.merge
	done

	staffer cp ${TMPDIR}/unref.merge $PARENT_WS/usr/src/unrefmaster.out
fi

#
# All done save for the sweeping up.
# (whichever exit we hit here will trigger the "cleanup" trap which
# optionally sends mail on completion).
#
if [[ "$build_ok" == "y" ]]; then
	if [[ "$W_FLAG" == "y" || "$build_extras_ok" == "y" ]]; then
		exit 0
	fi
fi

exit 1