source | all docs for version 0.8.pre8 | all versions | oilshell.org

Known Differences Between OSH and Other Shells

This document is for sophisticated shell users.

You're unlikely to encounter these incompatibilities in everyday shell usage. If you do, there's almost always a simple workaround, like adding a space or a backslash.

OSH is meant to run all POSIX shell programs, and most bash programs.

Numbers and Arithmetic

Roughly speaking, shells treat arithmetic like "macro processing", while OSH treats it more like part of a programming language.

Despite these differences, OSH is very compatible with existing shell scripts.

Note that you can opt into more errors with shopt -s strict_arith.

Static Parsing

Arithmetic is statically parsed, so expressions like $(( 1 $op 2 )) fail with a parse error. Use an explicit eval for these rare use cases.

Related: A 30-year-old security problem / Simple Word Evaluation

printf '%d' and other numeric formats require a valid integer

In other shells, printf %d invalid_integer prints 0 and a warning. OSH gives you a runtime error.

Parsing Differences

This section describes differences related to static parsing. OSH avoids the dynamic parsing of most shells.

(Note: This section should encompass all the failures from the wild tests and spec tests.

Strings vs. Bare words in array indices

Strings should be quoted inside array indices:

No:

"${SETUP_STATE[$err.cmd]}"

Yes:

"${SETUP_STATE["$err.cmd"]}"

When unquoted, the period causes an ambiguity with respect to regular arrays vs. associative arrays. See Parsing Bash is Undecidable.

Subshell in command sub

You can have a subshell in a command sub, but it usually doesn't make sense.

In OSH you need a space after $(. The characters $(( always start an arith sub.

No:

$((cd / && ls))

Yes:

$( (cd / && ls) )   # Valid but usually doesn't make sense.
$({ cd / && ls; })  # Use {} for grouping, not ().  Note trailing ;
$(cd / && ls)       # Even better

Extended glob vs. Negation of boolean expression

• [[ !(a == a) ]] is an extended glob.
• [[ ! (a == a) ]] is the negation of an equality test.

In bash the rules are more complicated, and depend on shopt -s extglob. The extglob setting does nothing in OSH.

Here doc terminators must be on their own line

Lines like EOF] or EOF) don't end here docs. The delimiter must be on its own line.

No:

a=$(cat <<EOF
abc
EOF)

a=$(cat <<EOF
abc
EOF  # this is not a comment; it makes the EOF delimiter invalid
)

Yes:

a=$(cat <<EOF
abc
EOF
)  # this is actually a comment

Spaces aren't allowed in LHS indices

Bash allows:

a[1 + 2 * 3]=value

OSH only allows:

a[1+2*3]=value

because it parses with limited lookahead. The first line would result in the execution of a command named a[1.

break / continue / return are keywords, not builtins

This means that they aren't "dynamic":

b=break
while true; do
  $b  # doesn't break in OSH
done

Static control flow will allow static analysis of shell scripts.

(Test cases are in spec/loop).

Oil Has More Builtins, Which Shadow External Commands

For example, push is a builtin in Oil, but not in bash. Use env push or /path/to/push if you want to run an external command.

(Note that a user-defined function push take priority over the builtin push.

Oil Has More Keywords, Which Shadow Builtins, Functions, and Commands

In contrast with builtins, keywords affect shell parsing.

For example, func is a keyword in Oil, but not in bash. To run a command named func, use command func arg1.

Note that all shells have extensions that cause this issue. For example, [[ is a keyword in bash but not in POSIX shell.

More Parsing Differences

These differences occur in subsequent stages of parsing, or in runtime parsing.

Brace expansion is all or nothing

No:

{a,b}{        # what does the second { mean?
{a,b}{1...3}  # 3 dots instead of 2

Yes:

{a,b}\{
{a,b}\{1...3\}

bash will do a partial expansion in the former cases, giving you a{ b{ and a{1...3} b{1...3}.

OSH considers them syntax errors and aborts all brace expansion, giving you the same thing back: {a,b}{ and {a,b}{1...3}.

Tilde expansion and Brace expansion don't interact

In bash, {~bob,~jane}/src will expand the home dirs of both people. OSH doesn't do this because it separates parsing and evaluation. By the time tilde expansion happens, we haven't evaluated the brace expansion. We've only parsed it.

(mksh agrees with OSH, but zsh agrees with bash.)

Brackets should be escaped within character classes

Don't use ambiguous syntax for a character class consisting of a single bracket character.

No:

echo [[]
echo []]

Yes:

echo [\[]
echo [\]]

The ambiguous syntax is allowed when we pass globs through to libc, but it's good practice to be explicit.

Double quotes within backticks

In rare cases, OSH processes backslashes within backticks differently than other shells. However there are two workarounds that are compatible with every shell.

No:

`echo \"`     # is this a literal quote, or does it start a string?

Yes:

$(echo \")    # $() can always be used instead of ``.
              # There's no downside to the more modern construct.
`echo \\"`    # also valid, but $() is more readable

Notes:

• This is tested in spec/command-sub. (Case #25 fails for OSH, and all shells start to disagree on case #26.)
• The reason for the disagreement is that OSH doesn't have special cases for a particular number of backslashes. The rules are consistent for any level of quoting, although incompatible in this edge case.

Differences at Runtime

Alias Expansion

Almost all "real" aliases should work in OSH. But these don't work:

alias left='{'
left echo hi; }

(cases #33-#34 in spec/alias)

or

alias a=
a (( var = 0 ))

Details on the OSH parsing model:

1. Your code is statically parsed into an abstract syntax tree, which contains many types of nodes.
2. SimpleCommand are the only ones that are further alias-expanded.

For example, these result in SimpleCommand nodes:

• ls -l
• read -n 1 (normally a builtin)
• myfunc foo

These don't:

• x=42
• declare -r x=42
• break, continue, return, exit — as explained above, these are keywords and not builtins.
• { echo one; echo two; }
• for, while, case, functions, etc.

Array References Must be Explicit

In bash, $array is equivalent to ${array[0]}, which is very confusing (especially when combined with set -o nounset).

No:

array=(1 2 3)
echo $array         # Runtime error in OSH

Yes:

echo ${array[0]}    # explicitly choose the first element
echo "${array[@]}"  # explicitly choose the whole array

NOTE: Setting shopt -s strict-array further reduces the confusion between strings and arrays. See the manual for details.

Arrays aren't split inside ${}

Most shells split the entries of arrays like "$@" and "${a[@]}" here:

echo ${undef:-"$@"}

In OSH, omit the quotes if you want splitting:

echo ${undef:-$@}

I think OSH is more consistent, but it disagrees with other shells.

Values Are Tagged with Types, Not Cells

In bash, cells (locations for values) are tagged with types. For example, these two statements are different:

declare -A assoc     # unset cell that will LATER be an assoc array
declare -A assoc=()  # empty associative array
set -u               # now we can tell the difference

OSH behaves more like Python or JavaScript: values are tagged with types like Str and AssocArray.

• The repr builtin is useful for gaining an understanding of the data model.
• See the Quirks doc for details on how Oil uses this cleaner model while staying compatible with bash.

Indexed and Associative Arrays are Distinct

This is a consequence of the previous point.

OSH has bash-compatible arrays, which are created like this:

local indexed=(foo bar)
local -a indexed=(foo bar)            # -a is redundant
echo ${indexed[1]}                    # bar

local assoc=(['one']=1 ['two']=2)
local -A assoc=(['one']=1 ['two']=2)  # -A is redundant
echo ${assoc['one']}                  # 1

In bash, the distinction between the two is blurry, e.g. in cases like this:

local -A x=(foo bar)                  # -A disagrees with literal
local -a y=(['one']=1 ['two']=2)      # -a disagrees with literal

Args to Assignment Builtins Aren't Split or Globbed

The assignment builtins are export, readonly, local, and declare/typeset.

In bash, you can do unusual things with them:

vars='a=b x=y'
touch foo=bar.py spam=eggs.py

declare $vars *.py       # assigns at least 4 variables
echo $a       # b
echo $x       # y
echo $foo     # bar.py
echo $spam    # eggs.py

In contrast, OSH disables splitting and globbing within assignment builtins. This is more like the behavior of zsh.

On a related note, assignment builtins are both statically and dynamically parsed:

• Statically: to avoid splitting declare x=$y when $y contains spaces.
• Dynamically: to handle expressions like declare $1 where $1 is a=b

shopt -s extglob is slightly different

In bash, an unquoted extended glob is a syntax error unless extglob is on. In Oil, extglob doesn't affect parsing at all.

Also, bash sometimes respects extended globs even when extglob is off. In Oil, they're respected if and only if extglob is on.

Completion

The OSH completion API is mostly compatible with the bash completion API, except that it moves the responsibility for quoting out of plugins and onto the shell itself. Plugins should return candidates as argv entries, not shell words.

See the OSH manual for details.

Interactive Features

History Substitution Language

The rules for history substitution like !echo are simpler. There are no special cases to avoid clashes with ${!indirect} and so forth.

TODO: Link to the history lexer.

Links

• OSH Spec Tests run shell snippets with OSH and other shells to compare their behavior.

External:

• This list may seem long, but compare the list of differences in Bash POSIX Mode. That page tells you what set -o posix does in bash.